SETTING THE GROUND
FOR YOUR STYLE
High quality adhesives for the installation of nora rubber flooring. High dimensional stability and odorless during and after the application.
To learn how to process these materials, see
THE REVOLUTIONARY FAST INSTALLATION SYSTEM
nora® nTx™ is a unique technology for professional installation of nora rubber floor coverings. Ingeniously simple - nora nTx floor coverings brings adhesive strength along from the factory.
Cleanly and safely installed in a few steps then immediately ready for use. Install over concrete or cement screed substrates typical in new construction or over existing floor coverings during renovations. Even high residual moisture in the subfloor is no problem.
RELIABLE INSTALLATION RESULT
nora nTx reduces installation problems: and is backed by our 10-year bond warranty.
RENOVATION IN 1 DAY. FLOOR ON FLOOR. NORA NTX.
Micheal Reitz
9 a.m., before the renovation.
Micheal Reitz
Sand and vacuum the substrate.
Michael Reitz
Apply nora nTx 020 primer, sand and vacuum.
Michael Reitz
Lay out the floor and cut it to size.
Remove protective film...
... and lay the flooring.
Michael Reitz
Roll the covering. The floor can be used immediately. No waiting time.
Michael Reitz
4 p.m. done! nora nTx flooring is installed.
NORA DRYFIX™ 750
nnora dryfix 750 provides you with a safe, healthy, cost and time-effective alternative to conventional flooring adhesives.
- Odorless
- Time-safing: No downtime, no necessary open time required
- Can be walked on or welded immediately
- Non-flammable and freeze/thaw stable
- Free of organic solvents, formaldehyde, asbestos, lindane, rosins, plasticizers or any other volatile components
- Meets the South Coast (CA) Air Quality Management District Rule 1168
Each roll of nora dryfix 750 covers approximately 242 square feet.
Art. 6556 / Dimensions: ~29.5 in x 98.5 ft (75 cm x 30 m)
NORA DRYFIX 750 INSTALLATION
Install nora dryfix 750 on the surface.
Continue to install and cut the seam between the nora dryfix 750 strips.
Cover the area with noraplan sheets or norament tiles. Than fold back the flooring.
Cut and remove the protective paper.
Roll the floor and than ... already done!
NORA DRYFIX™ ED
CONDUCTIVE DRY ADHESIVE
Double-sided conductive dry adhesive tape for the installation of electrostatically dissipative (ESD) and conductive nora® floor coverings. Installation is easy and requires only a few steps─no mixing or adhesive cleanup and allows for immediate traffic post-installation.
- Quick and easy installation
- Less downtime with immediate trafficking after installation
- Reliable installation result
- Suitable for all common substrates
- Possible to install over existing floor converings
- 10-year warranty on conductive properties
- GREENGUARD Gold certified for low VOC emissions
Each roll of nora dryfix ed covers approximately 242 square feet.
Art. 6706 / Dimensions: ~29.5 in x 98.5 ft (75 cm x 30 m)
DRYFIX ED INSTALLATION
Installation of nora dryfix ed on the subfloor.
Folding back the floor covering.
Cutting and removing the protective paper.
Installing the copper strip.
Placing the flooring.
Rolling the flooring.
Milling out joints.
Sealing the flooring with nora 1-C cold weld.
Made it! Floor covering installed with nora dryfix ed.
NORA PROFIX
Adhesive supplied in rolls for interior installations of nora sanitary base and flash coving
- Odorless
- Easy to install
- No waste
- Non-flammable and freeze/thaw stable
- Free of solvents, formaldehyde, asbestos, lindane, chlorinated biphenyls, pentachlorophenol, plasticizers or other toxic substances
- Meets the South Coast (CA) Air Quality Management District Rule 1168
Rolls of 164' (50.0 m length) with three differend widths:
- nora profix 145: 5.7'' wide (145.0 mm)
- nora profix 90: 3.5'' wide (90.0 mm)
- nora profix 50: 2'' wide (50.0 mm)
Installation of other manufacturers’ products involves risks for which nora systems, Inc. cannot assume any liability.
NORA STEPFIX 240
Adhesive tape for norament stairtreads. You can dry-fit the tread fight on the covered adhesive tape, and stairs can be walked on immediately after installation.
- Odorless
- GREENGUART GOLD certificied for low VOC emissions
- Easy to install
Art. 907
Dimension of rolls: 240 mm (~9.45 in) width x 50 m (~164 ft) lengh = 12 m2 (~129 SF)
NORA AC MR95 ACRYLIC ADHESIVE
easy-to-use, solvent free, water based acrylic adhesive
- able to resist high concrete relative humidity levels
- specifically formulated for the installation of nora rubber floor coverings (2 mm – 4 mm)
- Excellent for heavy traffic
- Non-flammable and freeze/thaw stable
- Free of organic solvents, formaldehyde, asbestos, lindane, rosins, plasticizers, or any other volatile components
- GREENGUARD Gold certified for low VOC emissions
- In compliance with South Coast (CA) Air Quality Management District Rule 1168
Article 6694, Coverage: ~ 880 - 1040 square feet per 4-gallon pail
NORA ED MR90 CONDUCTIVE ADHESIVE
easy-to-use, wet set, conductive, water based acrylic adhesive
- formulated for the installation of nora ed rubber floor coverings (2 mm - 4 mm) on absorptive substances
- Excellent for heavy traffic
- Non-flammable and freeze/thaw stable
- Free of organic solvents, formaldehyde, asbestos, lindane, rosins, plasticizers, or any other volatile components
- GREENGUARD Gold certified for low VOC emissions
- In compliance with South Coast (CA) Air Quality Management District Rule 1168
Article 6695, Coverage: ~ 640 - 720 square feet per 4-gallon pail
NORA PU MR 95
two-component urethane adhesive
- designed specifically for the installation of specific nora rubber floor coverings on suitable substrates. When parts A& B are thoroughly mixed together, they form a reactive adhesive that cures to a tough, flexible film with good resistance to surface moisture and many chemicals.
- Non-flammable and freeze/thaw stable
- Free of organic solvents, formaldehyde, asbestos, lindane, rosins, plasticizers, or any other volatile components
- GREENGUARD Gold certified for low VOC emissions
- In compliance with South Coast (CA) Air Quality Management District Rule 1168
Article 6696, Coverage: ~ 240 - 270 square feet per 1.5-gallon unit (2-gallon pail contains Pars A&B)
© Elmar Witt
NORA PU 102
two-component urethane adhesive
- designed specifically for the installation of specific nora rubber floor coverings on suitable substrates
- When parts A & B are thoroughly mixed together, they form a reactive adhesive that cures to a tough, flexible film with a good resistance to surface moisture and many chemicals.
- Non-flammable and freeze/thaw stable
- Free of organic solvents, formaldehyde, asbestos, lindane, rosins, plasticizers, or any other volatile components
- GREENGUARD Gold certified for low VOC emissions
- In compliance with South Coast (CA) Air Quality Management District Rule 1168
Article 6696