Skip to Content (Press Enter) Skip to Footer (Press Enter)

Products that go beyond neutral to help restore the health of the planet.

Carpet Tile Installation

Ease of Installation

Our carpet tiles install simply with our glue-free TacTiles™ installation system or spread adhesive. Carpet tile installation generates less waste than roll carpet, so you’re putting more of your investment on the floor, not in a dumpster. And, if you install our i2™ non directional styles, waste is as little as 1.5%.
Adhesive 2000 Plus

XL Adhesive 2000 Plus

An acrylic adhesive with extremely aggressive tack, XL Adhesive 2000 Plus is formulated to provide high shear and peel strength. This high solid adhesive is non-staining and contains Interface’s proprietary preservative, Intersept™, for enhanced resistance to mold and mildew and to protect the adhesive from bacterial and fungal growth.

Spread Rate: 3/8" nap roller with an application rate of 350 - 400 sq ft per gallon

TacTiles Install - 2

TacTiles

These revolutionary, glue-free adhesive squares adhere tiles to one another and create a "floating" floor. There are no liquid components, so VOCs are virtually eliminated and there is no odor. TacTiles™ connectors let you install carpet almost anywhere, any time.

Spread Rate: "Full Spread" install (every corner): 125 sy/roll (500 TacTiles per roll)

Installing Carpet Tile with TacTiles

Adhesive 2000 Plus

XL Adhesive 2000 Plus

An acrylic adhesive with extremely aggressive tack, XL Adhesive 2000 Plus is formulated to provide high shear and peel strength. This high solid adhesive is non-staining and contains Interface’s proprietary preservative, Intersept™, for enhanced resistance to mold and mildew and to protect the adhesive from bacterial and fungal growth.

Spread Rate: 1/16” x 1/32” x 1/32” U-notch trowel with an application rate of 220 - 260 sq ft per gallon

HM99 Adhesive

XL HM99 Adhesive

A high-strength, high-tack adhesive for installing over porous substrates, XL HM99 High Moisture Adhesive offers extended open time, fast dry time and ease of application. This unique adhesive has outstanding water resistance and tenacious bond strength for demanding installations such as hospitals, schools, nursing homes, hospitality and food preparation centers. The low odor is ideal for occupied buildings.

Spread Rate: 1/16” x 1/32” x 1/32” U-notch trowel with an application rate of 220 - 260 sq ft per gallon

Adhesive 2000 Plus

XL Adhesive 2000 Plus

An acrylic adhesive with extremely aggressive tack, XL Adhesive 2000 Plus is formulated to provide high shear and peel strength. This high solid adhesive is non-staining and contains Interface’s proprietary preservative, Intersept™, for enhanced resistance to mold and mildew and to protect the adhesive from bacterial and fungal growth.

Spread Rate: 3/8" nap roller with an application rate of 350 - 400 sq ft per gallon

HM99 Adhesive

XL HM99 High Moisture Adhesive

XL HM99 Adhesive - A high-strength, high-tack adhesive for installing over porous substrates, XL HM99 High Moisture Adhesive offers extended open time, fast dry time and ease of application. This unique adhesive has outstanding water resistance and tenacious bond strength for demanding installations such as hospitals, schools, nursing homes, hospitality, and food preparation centers. The low odor is ideal for occupied buildings.

Spread Rate: 3/8” nap roller with an application rate of 350 - 400 sq ft per gallon

RH95 Moisture Vapor Reduction

9511 Moisture Vapor Reduction

TriSeal Adhesive Residue Encapsulator

RH95

RH95 Moisture Vapor Reduction

RH95 is approved for use EXCLUSIVELY on Interface carpet tile and LVT installations. RH95 is an aqueous acrylic polymer that dries to a clear film that is alkali and water-resistant. It designed for use on interior porous concrete substrates as a penetrating and film-forming polymer to protect Interface flooring installations against moisture readings up to 95% in-situ Relative Humidity (RH), moisture vapor emission rate up to 10 lbs, and pH of 11.0. RH95 is designed and warranted for use only on Interface approved flooring installations.

Spread Rate: 3/8” nap roller with an application rate of 350 - 400 sq ft per gallon

Technical Data

Safety Data

9511 - for use with TacTiles

9511 Moisture Vapor Reduction

9511 is designed and warranted by  XL Brands for use ONLY in conjunction with Interface’s TacTiles installation system. 9511 is an aqueous acrylic polymer designed to protect interior flooring installations from high moisture and pH. 

Spread Rate: 3/8” nap roller with an application rate of 315 - 450 sq ft per gallon

Technical Data

Safety Data

XL Brands TriSeal

TriSeal Adhesive Residue Encapsulator

TriSeal is a light-colored, high-strength acrylic polymer compound formulated to isolate old cutback and other adhesive residues that would discolor or affect the bond of the new flooring installation. Prior to the installation of floor covering systems, TriSeal provides a clean surface for better adhesive bonds. Black asphalt-based cutback adhesive is highly reactive with vinyl back flooring and must be completely removed until there are no remaining trowel ridges or continuous film. TriSeal can be used to isolate the remaining permanent stain after the cutback has been removed.

Spread Rate: 3/8” nap roller with an application rate of 315 – 360 sq ft per gallon.

Technical Data

Safety Data

Technical Information

Quick access to maintenance and warranty details

jcr:title

Maintenance

Learn More
jcr:title

Warranty

Learn More